Windows 7 file copy the parameter is incorrect

With an external drive, driver issues are less common. However, if Chkdsk failed to detect issues with your drive, look for and install pending driver updates to see if that helps. If the issue persists, check for hard drive failure. Often, frequent freezes, reduced performance, system error, and data corruption are symptoms of a drive that is about to go kaput.

To learn more, check out our guide on the signs your hard drive is failing. If you determine the error is due to hardware failure, consider replacing the drive to avoid complete data corruption. Many external drives still use FAT32 as the default file system format. However, due to the limitations associated with the format, you are more likely to encounter errors when copying large files. To fix this, convert or reformat the drive as NTFS.

Additionally, look for drive errors due to bad sectors or hardware failure. Tashreef Shareef 77 Articles Published. First, launch MiniTool Partition Wizard, then select the partition which needs formatting and choose Format Partition from the left panel or choose Format from toolbar, and enter new partition label and choose desired file system and cluster size.

In general, default cluster size is recommended for Partition Wizard will work out proper cluster size according to partition size. As we know, if the error message "Drive is not accessible. The parameter is incorrect" is caused by corrupted file system, we can format this drive to fix it. However, what if the inaccessible drive is caused by bad sectors? In this situation, you can try the following solution. If the "the parameter is incorrect" error is caused by bad sectors, lost clusters, cross-linked files, file system errors and directory error, you can run chkdsk to fix it.

Detailed steps are shown below. First, tap Start menu, click All Programs and then choose Accessories. After that, right-click the Command Prompt and choose Run as administrator. After seeing the above introduction, I hope you now have a basic understanding of how to deal with "drive not accessible, the parameter is incorrect" error without damaging the original data stored on this drive.

To be specific:. Second, formatting this drive or running chkdsk to fix the "the parameter is incorrect" error. After reading the whole page, if you have any questions or any doubts about MiniTool Power Data Recovery, you can leave it in the following comments or directly send email to [email protected].

Download Power Data Recovery. Summary : In this article, you will find the reason to why the parameter is incorrect as well as the solutions to fix the incorrect parameter. The Parameter Is Incorrect. Note: Since this post introduces lots of information about this error, here we don't need to spend much time talking too much about it. Next, we want to show another situation where we may encounter the parameter is incorrect error.

Note: While scanning, you can preview the found files. If you have find all needed files, you can stop the scanning process by clicking the Stop button.

However, for the best recovery result, it is recommended to wait until full scan finishes, as shown below. Tip: In general, in addition to the "the parameter is incorrect" error, other errors will also cause hard drive not accessible. Here Are 6 Solutions. Tip: Do you know what cyclic redundancy check error is? Want to know the secret of how to effectively solve the "data error cyclic redundancy check " issue?

Look Here! Warning: Formatting will destroy all original data on this drive. Note: If you are prompted for entering administrator or for a confirmation, then type in the password, or click Allow. Tip: In some cases, the operation can't be completed under system, and you need to do this in safe mode or PE environment.

With an external drive, driver issues are less common. However, if Chkdsk failed to detect issues with your drive, look for and install pending driver updates to see if that helps.

If the issue persists, check for hard drive failure. Often, frequent freezes, reduced performance, system error, and data corruption are symptoms of a drive that is about to go kaput. To learn more, check out our guide on the signs your hard drive is failing. If you determine the error is due to hardware failure, consider replacing the drive to avoid complete data corruption.

Many external drives still use FAT32 as the default file system format. However, due to the limitations associated with the format, you are more likely to encounter errors when copying large files. To fix this, convert or reformat the drive as NTFS. Additionally, look for drive errors due to bad sectors or hardware failure.

If your hard disk drive has failed, this guide will help you with the hard disk drive's repair and data recovery. Tashreef is a developer and works as a technical writer at MakeUseOf. With a bachelor's degree in Computer Applications, he has over 5 years of experience and covers Microsoft Windows and everything around it. When he is not looking for a missing semicolon or churning out text, you can find him exploring programming languages, trying some FPS titles or exploring animated shows and movies.